Hans-Leo
2007-05-09, 12:06
Movalyzer works also on Pen PCs.
Check what digitizer technology your tablet PC uses (See stickers on front or back).
__________________________________________________ _________
Penabled Wacom (www.wacom.com/tabletpc/partners.cfm)
Goto www.wacom.com >Support >Driver Downloads >Select Tablet PC >Select your operating system.
A new screen will pop up with >Download, Save into a know location, Run, and Install
This will download: Wacom Penabled Driver Driver 5.03-3 (RC) for Penabled Tablet PCs. Release Date: 4/12/07. 3.4 Mb (39993280 b)
After installing, check the Tablet driver is visible in Add/Remove Programs. You can check the support option to verify it is the driver by Wacom and the size on disk is 1.97 Mb.
If not, reinstall.
If yes, but the pen does not seem to be recorded, uninstall once and reinstall.
To uninstall: Start >Control Panel >Programs >Tablet
Then go to Program Files >Wacom >Tablet properties and verify that pen movements are recorded.
o Start MovAlyzeR.
o Check that you can select Tablet as device. (If you cannot select the Tablet the Wacom driver was not installed). I should always be able to select Mouse if Tablet is not available. When writing in the recording window, a pen trace should be shown.
o Settings >Device setup wizard:
o Tablet
o Acquire tablet settings
o Set display width and height equal to tablet width and height
o Entire Desktop (default)
o OK
__________________________________________________ _________
Check what digitizer technology your tablet PC uses (See stickers on front or back).
__________________________________________________ _________
Penabled Wacom (www.wacom.com/tabletpc/partners.cfm)
Goto www.wacom.com >Support >Driver Downloads >Select Tablet PC >Select your operating system.
A new screen will pop up with >Download, Save into a know location, Run, and Install
This will download: Wacom Penabled Driver Driver 5.03-3 (RC) for Penabled Tablet PCs. Release Date: 4/12/07. 3.4 Mb (39993280 b)
After installing, check the Tablet driver is visible in Add/Remove Programs. You can check the support option to verify it is the driver by Wacom and the size on disk is 1.97 Mb.
If not, reinstall.
If yes, but the pen does not seem to be recorded, uninstall once and reinstall.
To uninstall: Start >Control Panel >Programs >Tablet
Then go to Program Files >Wacom >Tablet properties and verify that pen movements are recorded.
o Start MovAlyzeR.
o Check that you can select Tablet as device. (If you cannot select the Tablet the Wacom driver was not installed). I should always be able to select Mouse if Tablet is not available. When writing in the recording window, a pen trace should be shown.
o Settings >Device setup wizard:
o Tablet
o Acquire tablet settings
o Set display width and height equal to tablet width and height
o Entire Desktop (default)
o OK
__________________________________________________ _________